Magnetic Separator

The China magnetic separator has been widely applied to the recycling, timber industry, mining, ceramics, chemical, food and other fields. It is suitable for the wet magnetic separation of the magnetite, magnetic pyrite mine, baking, titanium iron ore material and other materials whose particle sizes are lower than 3mm, while it is also suitable for the deranging for the coal, non-ferrous ore, building materials, and other materials. The magnetic system of the separator uses the compound of the high-quality ferrite materials or the magnets. Due to the development of technology, the separator can be made into the shapes of roll, and the strength of the magnet has been improved to 1644.3T, which is the highest strength in the currently measured magnetic field.

Application of Magnetic Separator

The wet magnetic separator can separate raw materials with different magnetic rigidities. The machine works under the magnetic force and machine force. Magnetic separators are designed to recover ferromagnetic materials. The magnetic drum separators are available in designs and sizes to provide solutions for all applications. The heart of each separator is the magnetic system with its unique design, which has a proven record of high efficiency. China magnetic separator is available in cyclic design with processing vessel diameters smaller than 3mm. Magnetic separator is one kind of efficient equipment for processing fine, feebly magnetic minerals, such as hematite, limonite, wolfram, ilmenite, and tantalum-niobium, etc.

Basic Structure of Separator:

The wet magnetic separator in the separating industry is mainly made up of 6 parts of the cylinder, the magnetic rollers, the brush roller, magnetic department, tub, transmission parts. The cylinder is welded by the corrosion resistant plate of 2 to 3mm. The hat is made of the cast aluminum, connected by the corrosion resistant bolts on the bottom plate of the magnet yoke.The engine with the reduction machine or the steeples speed regulation engine drives the cylinder, the magnetic cylinder roller and the brush roller in rotation. The magnetic system is an open magnetic system installed in the cylinder. The magnets with stainless steel bolts are fixed on the bottom of the magnetic yoke, with the axis of the magnetic yoke stretching out of the cylinder and the connecting lever fixed on the end of the axis. The magnetic deflection can be adjusted by pulling the connecting lever. After adjusting, the deflection can be fixed by the levers.